Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Panda
    4. : How to replace the candles on the Panda

Fiat Panda - Video tutorial

Model: Fiat Panda MK 2, 169 - Years 2003-2012
Part: Spark plugs
Operation: How to replace the candles on the Panda

We replace the Fiat Panda spark plugs if they are damaged. Let's see how they change. We pull the lever to open the engine compartment located at the bottom left of the dashboard and lift the front hood, we secure the same. We remove the air filter, the engine cover panel. We remove the coil, unscrew the spark plug with a special socket wrench, grasp it with our hands and rotate it in a twist way, until it is extracted from the head. Unscrew the damaged spark plugs with a socket wrench (extract them from the head) and take the new glow plug and insert it into the engine head with the socket wrench. We mount the engine soundproofing panel, the air filter. We test the vehicle.


Posted on 5 December 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Panda 2012-2021 - How to replace the spark plugs in the Fiat Panda? Read Answer
    • Panda 2003-2012 - How often are the spark plugs on the Fiat Panda natural power changed? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos