Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Repairing the Cylinder Head Gasket

Model: Fiat Panda 141, MK 1 - Years 1980-2003
Part: Cylinder head

When a cylinder head gasket fails, it is usually better to replace it, but sometimes its cost can be even higher than that of the entire car, so in such cases, it is worth repairing it, and a sealing liquid can work well for this.
Once you have drained the coolant from the radiator, clean the cooling system with a cleaning product, add water while keeping the engine off, and then add the sealing liquid, bleeding the air from the system. The timing belt and the engine block have two reference marks that must align perfectly before removing the belt. This guide mainly shows the cleaning of the block surface after having flattened the head.

Updated on 9 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you repair the side window lifter in the Fiat Panda 169?
How do you repair the side window lifter in the Fiat Panda 169?
Fiat Panda (2003-2012 / 169, MK 2) In this video, we are explained how to proceed independently with the repair of the window regulator mechanism of the side window in a Fiat Panda 169…
Replacement of the Timing Chain Kit on the Fiat Panda 1.3 Multijet
Fiat Panda (2003-2012 / 169, MK 2) Noise or even breakage of the timing chain in Fiat 1.3 Multijet engines is a fairly common defect, especially if maintenance is neglected; to carry o…
How to Remove and Replace the ECU of the Fiat Panda
How to Remove and Replace the ECU of the Fiat Panda
Fiat Panda (2012-2026 / 319, MK 3) This guide illustrates the main steps to remove and replace the ECU of the Fiat Panda, following the instructions below. First, open the bonnet of th…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos