Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Engine Cylinder Head from a Fiat Panda

Model: Fiat Panda 141, MK 1 - Years 1980-2003
Part: Engine

Start by removing the oil dipstick, then take off the air intake box and all its components (using a socket spanner). Disconnect all the connectors supplying electricity to the glow plugs with needle-nose pliers. Remove the various wiring present on the cylinder head (disconnect the metal clips of the various hoses and the power connectors with pliers). Use a socket spanner or electric screwdriver to undo all the bolts on the engine cylinder head; remove it along with the gasket. Reassemble everything in reverse order (use appropriate adhesive).

Updated on 8 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Spark Plugs on a Fiat Panda
How to Change the Spark Plugs on a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) In this video, remove the spark plugs from a Fiat Panda. Open the engine bay, lift the front bonnet, secure it, and disconnect the battery terminals.…
How to Remove the Engine Ignition Coils on a Fiat Panda
How to Remove the Engine Ignition Coils on a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) Do you want to remove the coils from your Fiat Panda? Follow these steps. Pull the engine bay release lever located at the bottom left of the dashboa…
How to Replace Spark Plugs on Fiat Panda
How to Replace Spark Plugs on Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) Replace the spark plugs on the Fiat Panda if damaged. Here’s how to change them. Pull the lever to open the engine compartment located at the bottom …

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos