Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace Spark Plugs on Fiat Panda 169 1.2 Petrol

Model: Fiat Panda 169, MK 2 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Spark plugs

See other generations:
Video tutorial

In today's tutorial, you will learn how to remove and replace the engine spark plugs on a Fiat Panda 169 1.2 Petrol in simple steps. First, open the bonnet of your car and remove the screws securing the air filter housing using a 10 mm socket.

Disconnect the hose and remove the housing itself. Next, disconnect all four spark plug leads using pliers, as shown in the video.

At this point, use a 16 mm socket with an extension to unscrew and remove the spark plugs; then refit the new ones, hand-tightening before securing with the socket!


Updated on 10 April 2026 by ScegliAuto


Related tutorials

Replacing the Spark Plugs on the Fiat Panda 169
Replacing the Spark Plugs on the Fiat Panda 169
Fiat Panda (2003-2012 / 169, MK 2) How to proceed with replacing the spark plugs on the Fiat Panda 169? First, open the bonnet of the engine compartment. Prepare everything necessary f…
How to replace the spark plugs on the Fiat Panda version 169
How to replace the spark plugs on the Fiat Panda version 169
Fiat Panda (2003-2012 / 169, MK 2) In this video, you will see how to replace the spark plugs on the Fiat Panda version 169: first, open the front bonnet and remove the radiator air in…
How to Replace the Spark Plugs in a Fiat Panda?
How to Replace the Spark Plugs in a Fiat Panda?
Fiat Panda (2003-2012 / 169, MK 2) To replace the spark plugs in a Fiat Panda, open the bonnet to detach the plastic cover on top of the engine block. At the front, you will find the c…

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos