Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the spark plugs on the Fiat Panda version 169

Model: Fiat Panda 169, MK 2 - Years 2003-2012
Part: Spark plugs

In this video, you will see how to replace the spark plugs on the Fiat Panda version 169: first, open the front bonnet and remove the radiator air intake duct, then remove the engine cover. Using pliers, take off the rubber covers of the spark plugs, then clean them with a blast of compressed air. Now, using the appropriate socket, remove the worn spark plugs one by one, being careful not to drop them into the engine block. Apply copper grease to the new spark plugs before installing them, then using the same method - and with the same care - position them in place and tighten them one by one. Refit the rubber caps and replace the engine cover. Reattach the radiator duct. The job is complete. You can close the bonnet.

Updated on 1 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace Spark Plugs on Fiat Panda 169 1.2 Petrol
How to Replace Spark Plugs on Fiat Panda 169 1.2 Petrol
Fiat Panda (2003-2012 / 169, MK 2) In today's tutorial, you will learn how to remove and replace the engine spark plugs on a Fiat Panda 169 1.2 Petrol in simple steps. First, open the …
How to Change the Spark Plugs on a Fiat Panda
How to Change the Spark Plugs on a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) In this video, remove the spark plugs from a Fiat Panda. Open the engine bay, lift the front bonnet, secure it, and disconnect the battery terminals.…
How to Replace the Spark Plugs in a Fiat Panda?
How to Replace the Spark Plugs in a Fiat Panda?
Fiat Panda (2003-2012 / 169, MK 2) To replace the spark plugs in a Fiat Panda, open the bonnet to detach the plastic cover on top of the engine block. At the front, you will find the c…

Other guides you may be interested in

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos