Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Spark Plugs on the Fiat Panda 169

Model: Fiat Panda 169, MK 2 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Spark plugs

See other generations:
Video tutorial

How to proceed with replacing the spark plugs on the Fiat Panda 169? First, open the bonnet of the engine compartment. Prepare everything necessary for the replacement.

Start by removing the engine cover as shown in the video. Using a ratchet and a 10mm socket, unscrew the two nuts that secure the plastic part of the engine cover.

Ensure you correctly identify the four spark plugs as shown in the video. Remove the spark plug caps and begin unscrewing them with the socket as demonstrated in the video.

At this point, replace the old spark plugs with new ones and reassemble everything.


Updated on 22 May 2026 by ScegliAuto


Related tutorials

How to Replace Spark Plugs on Fiat Panda 169 1.2 Petrol
How to Replace Spark Plugs on Fiat Panda 169 1.2 Petrol
Fiat Panda (2003-2012 / 169, MK 2) In today's tutorial, you will learn how to remove and replace the engine spark plugs on a Fiat Panda 169 1.2 Petrol in simple steps. First, open the …
Replacing Spark Plugs on Fiat Panda 169
Replacing Spark Plugs on Fiat Panda 169
Fiat Panda (2003-2012 / 169, MK 2) Disconnect the air duct, as shown in the video. Unscrew the two bolts securing the engine cover and then remove it using the appropriate lever. Cover…
Replacing Spark Plugs on Fiat Panda 1.2 8v (169)
Replacing Spark Plugs on Fiat Panda 1.2 8v (169)
Fiat Panda (2003-2012 / 169, MK 2) Required tools: suitable thermal grade and pitch spark plugs for the vehicle, spark plug socket, feeler gauge, torque wrench. First, check the electr…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos