Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Panda
    4. : Replacement spark plugs on Fiat Panda 169

Fiat Panda - Video tutorial

Model: Fiat Panda MK 2, 169 - Years 2003-2012
Part: Spark plugs
Operation: Replacement spark plugs on Fiat Panda 169

Disconnect the air duct, as shown in the video. Unscrew the two pins that secure the engine compartment and then remove it using the appropriate lever. Cover with rags all parts of the engine where neither dust nor other types of dirt should enter. Disconnect the spark plug connectors using pliers with which you will need to be able to pry. Remove the candles by simply unscrewing them. Insert and screw in the new spark plugs. Install the connectors by pushing them onto the spark plug seats. Mount the compartment by hooking it onto the front lever and tightening the two fixing screws. Connect the air duct.


Posted on 29 December 2023 by ScegliAuto

    Frequently Asked Questions

    • Panda 2012-2021 - How to replace the spark plugs in the Fiat Panda? Read Answer
    • Panda 2003-2012 - How often are the spark plugs on the Fiat Panda natural power changed? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos