Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Bumper from a Fiat 500

Model: Fiat 500 312 - Years 2007-2024
Part: Front bumper

Can you remove the front bumper from your new Fiat 500? Let's see how to proceed in this video. Lift the bonnet and secure it. Using a battery-powered screwdriver or a manual screwdriver, unscrew the securing pins located at the top of the bumper. Once the screws at the top are removed, unscrew the splash guard pins and finally remove the pins located at the bottom of the bumper. Remove the bumper from the bodywork by hand. To proceed with the reassembly: hold the bumper against the bodywork and tighten all screws around the splash guard and the perimeter.

Updated on 27 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Fitting Front Bumper on Fiat 500
Fitting Front Bumper on Fiat 500
Fiat 500 (2012-2023 / 500 L) In this video tutorial, you will learn how to fit the front bumper of a Fiat 500. After purchasing the new bumper or previously removing the old one …
Removing the Plastics from the Bumper of the Fiat 500
Removing the Plastics from the Bumper of the Fiat 500
Fiat 500 (2007-2021 / 312) How to remove the front bumper of the Fiat 500 to replace it or to take off the parts. Lift the bonnet and secure it, raise the car on a jack to acce…
How to Remove the Front Bumper of the Fiat 500
How to Remove the Front Bumper of the Fiat 500
Fiat 500 (2007-2021 / ) To remove the front bumper of the Fiat 500, open the bonnet to access the screws located at the top of the piece. Once the screws are removed, unscre…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos