Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Wiper Blades on the Front Wipers of a Fiat Punto

Model: Fiat Punto MK 2, 188 - Years 1999-2011
Part: Windshield wipers

Prepare to replace the wiper blades on the front wipers of a Fiat Punto. Grip the front wiper with your hands, lift the clip with a screwdriver, and gently pull the wiper off the arm (without breaking it) as shown in the video. Mount the new wiper onto the arm (if the wiper is not original, use an adapter if available), you will hear a click indicating it is secured. Finally, lower the wiper arm onto the windscreen and perform the same operation on the second wiper. Test the new wipers once installed. It is always preferable to use original parts for better durability and quality.

Updated on 27 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Windscreen Wiper Blades on a Fiat Grande Punto
How to Replace the Front Windscreen Wiper Blades on a Fiat Grande Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) Remove the front wiper blade by hand, gently pulling the movable blade without breaking it, and slide it off the arm on the left. Fit the new blade o…
How to Remove the Front Wipers of a Fiat Punto
How to Remove the Front Wipers of a Fiat Punto
Fiat Punto (1999-2011 / MK 2, 188) Before starting, exit the cabin and head to the front of your Fiat Punto. Begin by lifting both front wipers by pulling them upwards. Next, turn the …
How to Replace the Wiper Blades on the Front Screen of a Fiat Grande Punto
How to Replace the Wiper Blades on the Front Screen of a Fiat Grande Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) Learn how to replace the wiper blades on the front screen of a Fiat Grande Punto. Take the rear wiper with your hands (as shown in the video), gently…

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos