1. Car
:
2. Fiat
:
3. Uno

Fitting the oil pan could appear to be a complex and delicate operation but in reality it is a simple practice to carry out even without resorting to a mechanic, obviously after having emptied the used oil from the engine. Apply on the perimeter of the cup, before installing it, a thread of black sealing paste to prevent any sweating, despite the gasket provided, it will be of the right thickness. Raise the car and position yourself under the engine block. Take the cup and align it to the engine so that you can screw all the screws in correspondence with the relative holes. Lower the car and fill the engine block with new oil.

Other guides that may interest you

• Fiat Uno - Other Do-It-Yourself Maintenance and Repair
• Oil Pan - Maintenance and repair on other vehicles
• Fiat Punto - Disassembly of the Fiat Grande Punto oil sump
• Fiat Punto - How to remove the oil pan on a Fiat Punto 2
• See All
• Engine - Maintenance and repair on other vehicles
• Fiat Ducato - How to solve the problem of a 2.3 MultiJet engine running poorly
• Fiat Ducato - How to prevent rust formation in the engine compartment of the Fiat Ducato
• See All
• Lock - Maintenance and repair on other vehicles
• Fiat Punto - How to open the trunk of a Fiat Punto that does not open with the remote control.
• Fiat Punto - How to remove the electronic lock of the Fiat Punto
• See All
• - Maintenance and repair on other vehicles
• Fiat 500 - How do you reset the tire pressure light in the Fiat 500?
• Fiat Cronos - How do you reset the tire pressure light on the Fiat Cronos?
• See All

How to remove the telepass holder from the windshield

Today we will explain how to remove the telepass holder from a vehicle's windshield. Removing the telepass holder from the windshield is a very simple and quick operation to perform independently, you just need to use nylon thread that you will need to pull towards the holder and pass it between the holder and the clip. After performing this operation, the holder will be removed. There may be glue residues on the windshield that can be removed with a solvent suitable for glass cleaning. After cleaning everything, it is possible to mount another telepass holder on the windshield in the same position as the one removed or elsewhere.

Watch the video!

More videos

• How do you reset the tire pressure light on the Toyota Aygo X?
  Posted on 23 May 2025 by ScegliAuto
• How do you replace the handbrake button of the Opel Mokka?
  Posted on 17 April 2025 by ScegliAuto
• How do you open the seat of the Honda Forza when the battery is dead?
  Posted on 4 April 2025 by ScegliAuto
• How do you reset the tire pressure warning light on the Hyundai Ix35?
  Posted on 2 April 2025 by ScegliAuto
• How to adjust the date and time of the Citroen C3
  Posted on 22 March 2025 by ScegliAuto
• How do you reset the tire pressure warning light on the Hyundai I40?
  Posted on 21 March 2025 by ScegliAuto
• How to open the front hood of the Jeep Renegade?
  Posted on 13 March 2025 by ScegliAuto
• How to disassemble and repair the soft top of the Fiat 500C
  Posted on 10 March 2025 by ScegliAuto
• How to change the date and time of the Renault Scenic
  Posted on 13 February 2025 by ScegliAuto
• How to reset the tire pressure sensor of the Hyundai I10
  Posted on 9 February 2025 by ScegliAuto