Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the transmission oil in a Fiat Uno?

Model: Fiat Uno MK 1 - Years: 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994
Part: Transmission fluid

See other generations:
Video tutorial

In this tutorial, we will see how to replace the transmission oil in a Fiat Uno, a very simple and quick operation. First of all, let's make sure that the engine is cool enough.

Then, we open the hood, locate the fill hole bolt on the upper side of the transmission case, and unscrew it using a 12mm socket wrench. Next, we lift the vehicle, go underneath it, unscrew the drain hole bolt with an 8mm wrench, and let all the oil contained in the system drain out. At this point, all that’s left is to tighten the lower bolt, add the necessary amount of oil using a flexible hose, and also tighten the upper bolt.


Posted on 3 December 2025 by ScegliAuto


Related tutorials

How do you reset the Service light of the Fiat Uno?
How do you reset the Service light of the Fiat Uno?
Fiat Uno (2010-2021 / Nuovouno , Type327) To reset the Service light that appears on the instrument panel of the Fiat Uno, you will need to connect a diagnostic tool to the OBD port of the ve…
Removing the Starter Motor on Fiat Uno Fire
Removing the Starter Motor on Fiat Uno Fire
Fiat Uno (1983-1995 / MK 1) In this tutorial, you will learn how to remove and replace the starter motor on a Fiat Uno with a Fire engine by following these simple steps. First,…
What is the Fuse Diagram for the Fiat Uno?
What is the Fuse Diagram for the Fiat Uno?
Fiat Uno (2010-2021 / Nuovouno , Type327) In this video, you will see the fuse diagram for the Fiat Uno and the location of the respective boxes, useful in case you need to check the fuse of …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos