Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Fix the Stiff Gear Change on a Fiat Ducato Van

Model: Fiat Ducato X290 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Transmission

See other generations:
Video tutorial

The gear change on a Fiat Ducato can become stiff or jam, especially in vans left unused during winter. The cause is almost always corrosion of the linkage (the mechanism connecting the gear lever to the gearbox), exposed to moisture and salt.

A new gearbox is not necessary: lubrication and a bit of patience will suffice. Get assistance: while someone moves the gear lever (with the engine off), spray WD-40 or a penetrating lubricant on the linkage joints, visible in the engine bay next to the gearbox.

Move the lever back and forth to distribute the product. If the movement improves, the problem is resolved.

For a permanent solution, apply a thick grease to the same parts: WD-40 dries out and washes away, while grease remains and protects for a long time. Your gear change will be smooth again.


Posted on 23 July 2026 by ScegliAuto


Related tutorials

Where is the starter motor located in the Fiat Ducato van?
Where is the starter motor located in the Fiat Ducato van?
Fiat Ducato (2014-2026 / X290) In this video, you can see where the starter motor is located in the Fiat Ducato van and how to proceed if you need to replace it. As shown, the star…
How to Reset the Service Light on a Fiat Ducato Van?
How to Reset the Service Light on a Fiat Ducato Van?
Fiat Ducato (2002-2006 / ) Resetting the service light on a Fiat Ducato van is very simple. Follow these steps in this tutorial. This procedure should only be performed after c…
How to Replace the Windscreen Washer Pump in a Fiat Ducato Van?
How to Replace the Windscreen Washer Pump in a Fiat Ducato Van?
Fiat Ducato (2006-2014 / X250) As shown in this tutorial, replacing the windscreen washer pump in a Fiat Ducato van is a very simple and quick operation. First, open the bonnet and…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos