Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Fiat Ducato Van?

Model: Fiat Ducato - Years: 2002, 2003, 2004, 2005, 2006
Part: Service warning light

See other generations:
Video tutorial

Resetting the service light on a Fiat Ducato van is very simple. Follow these steps in this tutorial.

This procedure should only be performed after completing all scheduled maintenance tasks. To do this, insert the key and turn on the instrument panel.

Then, press and hold the small button located just below the rev counter until the display shows "CFG2". At this point, select the configuration that suits your needs: CFG1, CFG2, or CFG3, corresponding to 18,640 miles, 12,427 miles, and 9,320 miles respectively, and confirm your choice by holding down the same button.


Updated on 11 May 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on a Fiat Ducato Van?
How to Reset the Service Light on a Fiat Ducato Van?
Fiat Ducato (2014-2026 / X290) .. In this tutorial, you will see how to reset the service light on a Fiat Ducato van, a very simple and quick operation to perform only.. …
How to Reset the Service Light on a Fiat Ducato Van?
How to Reset the Service Light on a Fiat Ducato Van?
Fiat Ducato (1993-2016 / MK 2) Resetting the service light on a Fiat Ducato van, as shown in this tutorial, is an extremely simple and quick operation. Before proceeding, ensure th…
How to reset the service light on a Fiat Ducato van?
How to reset the service light on a Fiat Ducato van?
Fiat Ducato (2002-2006 / ) Resetting the service light on a Fiat Ducato van is very simple. Follow these steps in this tutorial. This operation should only be performed after c…

    Frequently Asked Questions

    • Ducato 2014-2026 - How to reset the service warning light on Fiat Ducato? Read answer

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos