Do it yourself
Frequently asked questions about cars and motorcycles

How do you replace the battery of a Fiat Ducato Boxer Relay key?

Model: Fiat Ducato MK 2 - Years: 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004
Part: Key

See other generations:
Video tutorial

This operation should not be too difficult and you can do it independently. You just need a flathead screwdriver, leverage the key slot to open the shell.

Remove the flat battery, a CR2032, without forcing it and replace it with a new one, making sure that the positive side is facing upwards. Close the shell by pressing it firmly until you hear a click.

Try to verify that the remote control is working properly. If it doesn't work, check the direction of the battery or try with another battery.

Alternatively, contact a trusted expert who will quickly help you solve the problem.


Posted on 6 September 2025 by ScegliAuto


Related tutorials

Fiat Ducato (2014-2026 / X290) The maintenance operation of the front brakes on the Fiat Ducato (and its counterparts Peugeot Boxer and Citroen Relay/Jumper) is not complex. Lift t…
Fiat Ducato (2014-2026 / X290) This guide will show you how to disassemble and replace the key shell of the Fiat Ducato, as well as the Citroen Relay. First, take your remote and s…
Fiat Ducato (2014-2026 / X290) This guide shows how to open the rear doors of a Citroen Relay or a Fiat Ducato, as they are similar models. To open the rear door, first unlock the …
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Other guides you may be interested in

What does the "Code 82" message indicate in the Chevrolet Orlando and how to remove it?

If the "Code 82" message appears on the dashboard of your Chevrolet Orlando, it means that the service interval in miles or time has been reached. Once all scheduled maintenance tasks are completed, you can remove the warning by following the simple procedure shown in this tutorial. First, insert the key and turn on the ignition, then press the "MENU" button located on the left control stalk and navigate to the screen displaying the "Reset" option. At this point, press the "SET/CLR" button at the end of the same stalk and confirm the reset.

Watch the video!


by ScegliAuto

More videos