Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the service light on a Fiat Ducato van?

Model: Fiat Ducato - Years 2002-2006
Part: Warning light – error code

Resetting the service light on a Fiat Ducato van is very simple. Follow these steps in this tutorial. This operation should only be performed after completing all scheduled maintenance work. First, turn on the ignition, then press the button located just below the fuel level indicator to display the total mileage. Once done, hold the same button until "CFG 2" appears. At this point, choose which of the 3 service configurations to use: 1 for 18,000 miles, 2 for 12,000 miles, and 3 for 9,000 miles. Finally, press and hold the same button one last time to confirm the setting.

Updated on 11 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on a Fiat Ducato Van?
How to Reset the Service Light on a Fiat Ducato Van?
Fiat Ducato (2002-2006 / ) Resetting the service light on a Fiat Ducato van is very simple. Follow these steps in this tutorial. This procedure should only be performed after c…
Where is the Windscreen Wiper Fuse in the Fiat Ducato Van?
Where is the Windscreen Wiper Fuse in the Fiat Ducato Van?
Fiat Ducato (2014-2026 / X290) If the windscreen wipers in the Fiat Ducato van are not functioning, first check the status of the respective fuse, which is located as shown in this…
How to Replace the Fuel Filter in a Fiat Ducato Van?
How to Replace the Fuel Filter in a Fiat Ducato Van?
Fiat Ducato (2006-2014 / X250) Replacing the fuel filter in a Fiat Ducato van, as shown in this tutorial, is a very simple and quick task. Before proceeding, wait for the engine to…

    Frequently Asked Questions

    • Ducato 1993-2016 - What does the red engine light on the Fiat Ducato 2 indicate? Read answer
    • Ducato 2002-2006 - Meaning of the dashboard warning lights on the Fiat Ducato? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos