Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Oil and Filter on Your Fiat 500X

Model: Fiat 500 500 X - Years 2014-2022
Part: Engine oil

Do you want to change the oil and filter on your Fiat 500X? Let's see how to proceed with the replacement in this video: lift the bonnet and secure it with the provided prop rod, then raise the car on a column lift or jack. Unscrew the oil sump plug, allow the fluid to drain into a disposal container, and re-screw the plug. Use a strap wrench to unscrew the oil filter, remove it, and fit the new one. Finally, top up with new oil, and measure the oil level multiple times with the metal dipstick until you reach the ideal measurement.

Updated on 2 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the cabin air filter of the Fiat 500X
Fiat 500 (2014-2022 / 500 X) In the following guide you will find the description of all the various steps that you need to follow to complete the replacement of the cabin air fi…
How to Replace the Oil Filter on a Fiat 500X
How to Replace the Oil Filter on a Fiat 500X
Fiat 500 (2014-2022 / 500 X) How do you replace the oil filter on a 500X? Here’s how to proceed with the replacement: open the car door and pull up the engine compartment release…
How to Reset the Oil Light on the Fiat 500X
How to Reset the Oil Light on the Fiat 500X
Fiat 500 (2014-2022 / 500 X) If you own the new Fiat 500X with automatic transmission and want to learn how to correctly reset the engine oil light that stays on in the instrumen…

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos