Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to deactivate the lane assist of the Fiat Tipo

Model: Fiat Tipo 356, 357, 358 - Years 2016-2026
Part: Checks and maintenance

In the following article, we will see how to deactivate the lane assist or lane control of the Fiat Tipo. To perform this procedure, only a few seconds are needed and it does not require software, a computer, or tools. To deactivate it, simply start the engine, then press the appropriate button twice located on the side of the turn signal lever, in this way it will be deactivated. This procedure may be useful in case of a dead battery, a sensor malfunction that causes abnormal system behavior. Furthermore, through the settings, it is possible to adjust the parameters for its operation.

Posted on 2 March 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Tyre Pressure Warning Light on the Fiat Tipo
How to Reset the Tyre Pressure Warning Light on the Fiat Tipo
Fiat Tipo (2016-2026 / 356, 357, 358) In a few simple steps, learn how to reset the tyre pressure monitoring system (TPMS) warning light on the Fiat Tipo; before performing the reset, ens…
How to Reset the "Service" Light on a Fiat Tipo
How to Reset the "Service" Light on a Fiat Tipo
Fiat Tipo (2016-2026 / 356, 357, 358) Before you can begin, sit in the driver's seat of your Fiat Tipo. Start by turning the key in the ignition switch to activate the instrument panel. N…
How to reset the Service light on the Fiat Tipo?
How to reset the Service light on the Fiat Tipo?
Fiat Tipo (2016-2026 / 356, 357, 358) You can completely clear the Service light from the instrument cluster of the Fiat Tipo by inserting the ignition key into the corresponding switch t…

Other guides you may be interested in

    Frequently Asked Questions

    • Fiat Tipo 2016-2026 - The Start and Stop system no longer works on my Fiat Tipo, what could it be? Read answer

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos