Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the service light on the Fiat Toro without using the scanner

Model: Fiat Toro MK 1 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Service warning light

Video tutorial

In this video, we will see how to reset the service light of a Fiat Toro without using a scanner and the OBD port; in fact, it is indicated that the problem can only be resolved through the diagnostic port. However, there is an empirical method: the car must be turned off; we press the accelerator pedal all the way down and then turn on the instrument panel.

Now we will press the brake pedal all the way down and slowly five times. We continue to hold down the accelerator pedal and turn off the instrument panel.

We release the accelerator pedal and wait for about ten seconds, then turn on the instrument panel again. We can see that the light no longer turns on.


Posted on 29 March 2025 by ScegliAuto


Related tutorials

How to Reset the Service Light on a Fiat Toro?
How to Reset the Service Light on a Fiat Toro?
Fiat Toro (2016-2024 / MK 1) To reset the Service light that appears on the instrument cluster of the Fiat Toro, connect a diagnostic tool to the vehicle's OBD port: this is loca…
How to Reset the Service Light on a Fiat Toro?
How to Reset the Service Light on a Fiat Toro?
Fiat Toro (2016-2024 / MK 1) To reset the Service light on a Fiat Toro, turn on the instrument cluster by turning the ignition key in the ignition switch. Once the instrument clu…
How to turn off the service light on the Fiat Toro
How to turn off the service light on the Fiat Toro
Fiat Toro (2016-2024 / MK 1) How to turn off the service light of the Fiat Toro, without using diagnostic devices? We will see it in this video. We will use an empirical techniqu…

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos