Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Air Control Panel on a Fiat Punto

Model: Fiat Punto MK 2, 188 - Years 1999-2011
Part: Push button

How to remove the air control panel located on the centre console of a Fiat Punto? Follow this guide: remove the lower part of the centre tunnel, take off the dashboard cover for the air conditioning controls (unscrew the plastic mounting bolts), then, extract the upper part of the instrument panel as shown in the video. Be careful not to break the plastic tabs. After removing the control panel, disconnect the power connectors and unscrew it with a screwdriver. Finally, reassemble everything in reverse order.

Updated on 3 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the LEDs/Bulbs of the Air Control Knobs on a Fiat Grande Punto
How to Change the LEDs/Bulbs of the Air Control Knobs on a Fiat Grande Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) How do you change the LEDs/bulbs of the manual air conditioning knobs on a Fiat Grande Punto? Follow this guide. Remove the ventilation knob panel us…
Removing the Air Vent Knobs on a Fiat Punto
Removing the Air Vent Knobs on a Fiat Punto
Fiat Punto (1993-1999 / MK 1, 176) Let's look at removing the air vent knobs on a Fiat Punto to replace the bulbs. Unscrew the screws located at the bottom of the air vent knobs, prepa…
How to Replace the Climate Control Knob of the Fiat Punto Evo
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) In this short and simple guide, you will see the steps to remove and replace the climate control knob of the Fiat Punto Evo, as well as the Grande Pu…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos