Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the front headlights of the Fiat 500

Model: Fiat 500 312 - Years 2007-2024
Part: Headlight

Replacing the front headlights of the Fiat 500 is a fairly simple operation to carry out independently. Before starting the disassembly of the headlights, it is necessary to completely remove the front bumper as some of the screws that support the headlights are located inside it. To remove the front bumper, we must unscrew the top screws and then slightly detach the bumper from the right side to unscrew the screws, and then from the left side to unscrew the other screws, also unscrew the bottom screws and remove the bumper completely. After removing the bumper, we can unscrew the screws that lock the headlight. Disconnect the headlight connector and proceed with its replacement, perform the same procedure for the right headlight.

Posted on 10 May 2025 by ScegliAuto

Video tutorial

Related tutorials

Guide to Adjusting the Headlights of the Fiat 500
Guide to Adjusting the Headlights of the Fiat 500
Fiat 500 (2007-2024 / 312) This guide provides the main instructions for adjusting the front headlights of the Fiat 500. First, open the bonnet and position the vehicle against…
How to Remove the Front Headlamps of the Fiat 500 Abarth
How to Remove the Front Headlamps of the Fiat 500 Abarth
Fiat 500 (2007-2021 / 312) Discover in this guide how to remove and replace the front headlamps of the Fiat 500 Abarth. First, open the bonnet and start by removing the screws …
How to replace the lights and fog light bulbs of the front fog lights on a Fiat 500.
How to replace the lights and fog light bulbs of the front fog lights on a Fiat 500.
Fiat 500 (2007-2024 / 312) Let's briefly review the instructions that will allow us to disassemble and replace the lights and fog lights on the front of the Fiat 500. First, le…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos