Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the Service light on the Fiat Tipo?

Model: Fiat Tipo 356, 357, 358 - Years 2016-2026
Part: Service warning light

To reset the Service light of the Fiat Tipo, you need to insert the ignition key into the corresponding slot and turn it to turn on the instrument panel. Once the panel is on, you can press the accelerator pedal and brake pedal seven times. Then, you can continue to press the accelerator pedal for about a minute before turning off the panel; it should remain off for about a minute as well. After this time, you can turn the panel back on to check if the light has disappeared.

Posted on 12 May 2025 by ScegliAuto

Video tutorial

Related tutorials

How do you reset the Service light of the Fiat Tipo?
How do you reset the Service light of the Fiat Tipo?
Fiat Tipo (2016-2026 / 356, 357, 358) To completely remove the Service light from the Fiat Tipo instrument panel, you will need to connect a diagnostic tool to the vehicle's OBD port: thi…
How to Reset the Service Light on a Fiat Tipo?
How to Reset the Service Light on a Fiat Tipo?
Fiat Tipo (2016-2026 / 356, 357, 358) When the Service light illuminates on the Fiat Tipo display, it indicates that the scheduled service period has been exceeded. The light cannot be re…
How to reset the Service light on the Fiat Tipo?
How to reset the Service light on the Fiat Tipo?
Fiat Tipo (2016-2026 / 356, 357, 358) The Service light reset on the Fiat Tipo cannot be performed using the appropriate commands within the onboard computer: to execute the reset, a diag…

Other guides you may be interested in

    Frequently Asked Questions

    • Fiat Tipo 2016-2026 - How to remove the oil change warning light in the Fiat Tipo? Read answer
    • Fiat Tipo 2016-2026 - How do you reset the Fiat Tipo service warning light? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos