Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. 500
    4. : How to remove the soft top of an old type Fiat 500

Fiat 500 - Video tutorial

Model: Fiat 500 Epoca - Years 1957-1975
Part: Soft top
Operation: How to remove the soft top of an old type Fiat 500

How to remove the soft top of an old type Fiat 500? Let's see in this video how to proceed: with a screwdriver remove the nut covers placed on the sides of the hood (next to the frame), then unscrew the nuts placed on it with a fixed or socket wrench. Once the nuts have been unscrewed, let's move the soft top back (as in the video). We unscrew the screws located on the locking bar of the soft top on the top and inside of the car. We remove the retaining hooks of the soft top placed on the frame of the car frame. Finally, remove the hood from the car body and get ready to mount a new one with hooks and stops included.


Posted on 3 November 2023 by ScegliAuto

    Frequently Asked Questions

    • 500 2007-2023 - Why doesn't the Fiat 500's sunroof open? Read Answer
    • 500 2007-2022 - Where is the electric motor on the Fiat 500 hood located? Read Answer
    • 500 2007-2022 - Where can you buy the Fiat 500 C soft top repair kit? Read Answer
    • 500 2007-2022 - Why does the Fiat 500 roof struggle to open? Read Answer
    • 500 2007-2022 - How much does it cost to repair the Fiat 500C soft top? Read Answer
    • 500 2007-2022 - What problems can the Fiat 500c soft top present? Read Answer
    • 500 2007-2021 - What problems can the Fiat 500 sunroof present? Read Answer
    • 500 2007-2021 - How much does it cost to replace the soft top in the Fiat 500C? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos