Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the external rearview mirror of the Fiat Scudo

Model: Fiat Scudo MK 2 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Side mirror

See other generations:
Video tutorial

Let's see the process that will allow us to disassemble and replace the external rearview mirror of the Fiat Scudo, in simple steps. First, we open the front door of the vehicle and start disassembling and removing the door panel, unscrewing all the fixing screws; then we unscrew the screws of the mirror that we find on the inside, disconnecting the electrical connector of the adjustment to remove it, as shown in the video.

At this point, we install the new external rearview mirror, reassembling the door panel last and adjusting the mirror glass.


Posted on 28 September 2025 by ScegliAuto


Related tutorials

How to Replace the External Wing Mirror on the Fiat Scudo
Fiat Scudo (1996-2007 / MK 1) If you own a first-generation Fiat Scudo and want to learn how to replace the external wing mirror, read this guide carefully and follow the describe…
How to replace the cabin air filter of the Fiat Scudo
How to replace the cabin air filter of the Fiat Scudo
Fiat Scudo (2007-2016 / MK 2) If you want to independently replace the air filter located in the cabin of your Fiat Scudo, you just need to read the following guide and put into p…
Where are the Fuses on a Fiat Scudo?
Where are the Fuses on a Fiat Scudo?
Fiat Scudo (2007-2016 / MK 2) The fuses on a Fiat Scudo are located inside three fuse boxes installed in the vehicle. These boxes can be found low on the left side of the steering…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos