Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Idea
    4. : How to intervene on the disassembly of the front half shaft on Fiat Idea

Fiat Idea - Video tutorial

Model: Fiat Idea MK 1 - Years 2003-2016
Part: Drive shaft
Operation: How to intervene on the disassembly of the front half shaft on Fiat Idea

Let's see how to intervene on the disassembly of the front half-axle on Fiat Idea. We position our car on a column bridge: we lift to a comfortable height to intervene, unscrew the wheel pins (with a telescopic wrench or compressed air drill) and slide it off, then, we begin to unscrew the pins of the disc brake. Unscrew the pins under the disc and completely remove the drive shaft with the boot; we pull the arm around the joint with our hands. We mount the new boot (after removing the old one) of the CV joint, then, we begin to assemble all the pieces backwards.


Posted on 3 November 2023 by ScegliAuto



How to replace the third stop in the Fiat Idea
Fiat Idea (2003-2016 / MK 1) In today's video we will see how to replace the third stop light bulbs in the Fiat Idea. First we open the tailgate. We unscrew the two screws of the
How to replace the Fiat Idea remote control battery?
Fiat Idea (2003-2016 / MK 1) As we can see in this tutorial, replacing the Fiat Idea remote control battery is an extremely simple and economical operation. To do this, let's get
How to replace the brake light bulb of the Fiat Idea?
Fiat Idea (2003-2016 / MK 1) Being in the presence of a problem with the stop light bulb or other anomaly, always belonging to the rear lights, forces you to intervene by removin

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos