Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Installing an Armrest on Fiat 500X

Model: Fiat 500 500 X - Years 2014-2022
Part: Accessory kit

The armrest is a useful and comfortable accessory that makes longer journeys much more enjoyable while keeping items stored in the compartment below secure. The installation is extremely simple as it involves screwing in just two screws: position the armrest support bracket against the rear wall of the storage compartment, centre it, and first screw in the upper screw and then the lower one, applying the appropriate caps afterwards. At the end of the installation, check the free movement of the armrest.

Updated on 6 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Install the Centre Armrest on the Fiat 500X
How to Install the Centre Armrest on the Fiat 500X
Fiat 500 (2014-2022 / 500 X) This armrest is specifically designed for the Fiat 500X and is very easy to install. Simply attach two clips to the centre tunnel to mount the armres…
How to Install Door Lights on the Fiat 500X
How to Install Door Lights on the Fiat 500X
Fiat 500 (2014-2022 / 500 X) In today's video, see how to install door lights on the Fiat 500X. Specifically, these are plug & play units, making installation straightforward. Fi…
How to Reset the "TPMS" Light on a Fiat 500X
How to Reset the "TPMS" Light on a Fiat 500X
Fiat 500 (2014-2022 / 500 X) Before you begin, sit in the driver's seat of your Fiat 500X. Start by selecting the vehicle settings page using the selection arrows on the steering…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos