Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the rear wiper on a Fiat 500X

Model: Fiat 500 500 X - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Windshield wipers

See other generations:
Video tutorial

Release the rear windshield wiper arm: Find the base of the rear windshield wiper arm and release it. Usually, you can do this by pressing a tab or gently lifting the base. Lift the wiper blade: After releasing the base, lift the rear windshield wiper blade.

Position it at about 90 degrees to the arm. Separate it from the arm housing: Push the blade outward to remove it from the arm housing. Install the new blade: Take the new blade and install it on the metal arm. If the blade is not original, you may need to install an adapter if available.

You will hear a clicking sound once it is properly attached. Lower the rear wiper arm: Position the rear wiper arm on the rear windshield.

Test the new blade: Operate the wiper to ensure that the new blade is installed correctly. It is preferable to always use original parts to ensure greater durability and quality.


Posted on 28 December 2024 by ScegliAuto


Related tutorials

How to replace the rear windshield wiper of the Fiat 500 X
How to replace the rear windshield wiper of the Fiat 500 X
Fiat 500 (2014-2022 / 500 X) Today we will explain how to replace the rear windshield wiper blade of the Fiat 500 X. To perform this simple operation, we will use Bosch model h84…
How to Remove the Front Glove Compartment of a Fiat 500x
Fiat 500 (2014-2022 / 500 X) In this video, we will see how to remove the front glove compartment of a Fiat 500x (located at the top of the dashboard). Open the glove compartment…
How to Remove the External Door Handle on a Fiat 500X
How to Remove the External Door Handle on a Fiat 500X
Fiat 500 (2014-2022 / 500 X) In this video, you will see how to remove the external door handle on the driver's side of a Fiat 500X in simple and quick steps. First, open the fro…

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos