Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the rear windshield wiper of the Fiat 500 X

Model: Fiat 500 500 X - Years 2014-2022
Part: Windshield wipers

Today we will explain how to replace the rear windshield wiper blade of the Fiat 500 X. To perform this simple operation, we will use Bosch model h840 blades, 29 cm long. First, lift the wiper arm and tilt the blade, then push it outwards. After sliding the old blade off, insert the new one into the arm. Lock the clip and bring the arm back onto the windshield. Get into the car and turn on the wipers to test their functionality. If the blade does not work after installation, it may be necessary to replace the corresponding fuse.

Posted on 1 May 2025 by ScegliAuto

Video tutorial

Related tutorials

How to replace the rear windshield wiper of the Fiat 500
How to replace the rear windshield wiper of the Fiat 500
Fiat 500 (2007-2024 / 312) Below we will discover the steps that will allow us to disassemble and replace the rear windshield wiper or rear wiper of the Fiat 500. First, move t…
How to replace the rear windshield wiper of the Fiat 500
How to replace the rear windshield wiper of the Fiat 500
Fiat 500 (2007-2024 / 312) In this guide, we will see the instructions that will allow us to disassemble and replace the rear windshield wiper or rear wiper of the Fiat 500, in…
How to change the rear windshield wiper of the Fiat 500
How to change the rear windshield wiper of the Fiat 500
Fiat 500 (2007-2023 / ) Today we will see how to disassemble and replace the rear windshield wiper of the Fiat 500, following the instructions below. First of all, move to t…

    Frequently Asked Questions

    • 500 1957-1975 - Where can you find the window washer bag of the vintage Fiat 500? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos