Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the External Door Handle on a Fiat 500X

Model: Fiat 500 500 X - Years 2014-2022
Part: Handle

In this video, you will see how to remove the external door handle on the driver's side of a Fiat 500X in simple and quick steps. First, open the front door and remove the rubber cap found on the side; then use a Torx key to unscrew the fixing screw located inside, as shown in the video. At this point, you can first extract the lock cylinder and then the opening handle; finally, refit the new handle and the lock cylinder, applying the reverse procedure of disassembly!

Updated on 8 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Exterior Handle of the Fiat 500X?
How to Remove the Exterior Handle of the Fiat 500X?
Fiat 500 (2014-2022 / 500 X) This video tutorial shows you how to remove the rear exterior handle of the Fiat 500X, to follow in case it breaks and needs replacing. First, remove…
Removing the External Handle and Lock of the Fiat 500
Removing the External Handle and Lock of the Fiat 500
Fiat 500 (2007-2021 / 312) In this tutorial, you will learn how to remove, in simple steps, the external handle and lock of a Fiat 500 door. First, open the front door and remo…
Guide to replacing the external rearview mirror of the Fiat 500X
Guide to replacing the external rearview mirror of the Fiat 500X
Fiat 500 (2014-2022 / 500 X) The following steps will allow us to disassemble and replace the external rearview mirror of the Fiat 500X. First, we open the front driver's side do…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos