Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. 500
    4. : How to remove the external handle of the Fiat 500X?

Fiat 500 - Video tutorial

Model: Fiat 500 500 X - Years 2014-2022
Part: Handle
Operation: How to remove the external handle of the Fiat 500X?

This video tutorial shows us how to remove the rear external handle of the Fiat 500X, to be followed in case it breaks and we need to replace it. As we can see, the inner door panel must first be removed and we can do this by unscrewing the screws indicated, disengaging the speaker grille and the window button plate. Once the panel has been removed, we make a cut in the insulating sheet near the handle. At this point we can proceed with the disassembly or repair of the same, based on the problem encountered. Finally, let's make sure that the rope is well anchored once everything has been reassembled.


Posted on 8 June 2022 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • 500 2007-2022 - Why does the Fiat 500 door handle not work? Read Answer
    • 500 2007-2022 - How much does it cost to replace the Fiat 500 handle? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos