Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Punto
    4. : How to replace the diesel filter on Fiat Grande Punto

Fiat Punto - Video tutorial

Model: Fiat Punto 199, Punto EVO, Grandepunto , MK 3 - Years 2005-2018
Part: Diesel filter
Operation: How to replace the diesel filter on Fiat Grande Punto

We replace the diesel filter mounted on a Fiat Grande Punto: we raise the bonnet of the car; we identify the diesel filter as in the video and with a large screwdriver we unscrew the pin that tightens (we can also use a socket wrench) placed near the container where the diesel filter is located. Once the filter has been removed, remove it from the car (replace it with a new filter). Finally we reassemble the filter to the attached container of the diesel filter (we connect pipes and cables) and tighten the appropriate pins. We close the front hood at the end of assembly.


Posted on 6 November 2023 by ScegliAuto

    Frequently Asked Questions

    • Punto 2005-2018 - Where is the Fiat Punto diesel filter located? Read Answer
    • Punto 2005-2018 - How much does it cost to replace the diesel filter in the Fiat Grande Punto 1.3 MultiJet? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos