Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Diesel Filter on Fiat Grande Punto 1.3 MultiJet

Model: Fiat Punto MK 3, Punto EVO, 199, Grandepunto - Years 2005-2018
Part: Diesel fuel filter

In this video, learn how to remove and replace the diesel filter on a Fiat Grande Punto with a 1.3 MultiJet engine. First, open and lift the bonnet of your car and locate the diesel filter on the left; then, start by removing the inlet and outlet fuel pipes as shown in the video. Next, unscrew the bolt of the side bracket with a 10 mm spanner; lift the filter and disconnect the electrical connector found at the bottom. Finally, replace it with the new one by following the reverse procedure!

Updated on 7 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Diesel Filter on a Fiat Grande Punto 1.3 MultiJet
How to Change the Diesel Filter on a Fiat Grande Punto 1.3 MultiJet
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) In this video tutorial, you will learn how to disassemble and replace the diesel filter on the Fiat Grande Punto 1.3 MultiJet, as well as on the Punt…
How to Replace the Diesel Filter on a Fiat Punto Evo 1.3 MultiJet
How to Replace the Diesel Filter on a Fiat Punto Evo 1.3 MultiJet
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) In this video, you will see how to remove and replace the diesel filter on a Fiat Punto Evo 1.3 MultiJet, as well as on the Grande Punto. First, open…
Replacing the Diesel Filter on the Fiat Grande Punto 1.3 MultiJet
Replacing the Diesel Filter on the Fiat Grande Punto 1.3 MultiJet
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) In this video tutorial, you will learn how to remove and replace the diesel filter on the Fiat Grande Punto 1.3 MultiJet, as well as the Punto Evo. F…

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos