Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Wiper Blades on a Fiat 500

Model: Fiat 500 312 - Years 2007-2024
Part: Windshield wipers

How to replace the front wiper blades on a Fiat 500. Take the front blade, pull (as shown in the video) the blade (gently without breaking it) and slide it off the arm located above the windscreen. Fit the new blade onto the arm (if the blade is not original, detach the piece as shown in the video), you will hear a click when it is securely attached. Finally, lower the wiper arm onto the windscreen and perform the same operation on the second blade. Test the new blades installed. It is always preferable to use original parts for better durability and quality.

Updated on 9 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Wiper Blades on a Fiat 500
How to Replace the Wiper Blades on a Fiat 500
Fiat 500 (2007-2021 / ) To replace the wiper blades on a Fiat 500, lift the wiper arm and press the pin that connects the blade to the arm. This will allow you to slide the …
How to Replace the Wiper Blades on the Fiat 500X?
Fiat 500 (2014-2022 / 500 X) The procedure for removing the wiper blades on the Fiat 500X is the same for both the front and rear blades. In both cases, lift the wiper arm to mov…
How to Replace the Wiper Blades on the Fiat 500 L
How to Replace the Wiper Blades on the Fiat 500 L
Fiat 500 (2012-2023 / 500 L) In today's video tutorial, you will find instructions on how to remove and replace the wiper blades on the Fiat 500 L in simple and quick steps. Firs…

    Frequently Asked Questions

    • 500 1957-1975 - Where can you find the window washer bag of the vintage Fiat 500? Read answer

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos