Do it yourself
Frequently asked questions about cars and motorcycles

How to Fix the Light Warning on a Fiat Idea

Model: Fiat Idea MK 1 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Tail light

Video tutorial

In this video, we will see how to resolve the light warning on a Fiat Idea: the light remains on even after replacing the bulb. The issue is not the bulb, but its incorrect orientation in the holder: the connector must be inserted correctly to close the circuit; if it is crooked or misaligned, the control unit detects an anomaly and turns on the light.

Access from the boot, unscrew the two fixing screws from the inside, and remove the headlamp. The problematic bulb in this case is the stop light, which is misaligned in the holder: the two pins of the connector were not correctly aligned with the holes of the holder.

Simply reinsert the bulb correctly. However, the control unit has memorised the error, but no specific tools are needed to clear it; turn off the car, remove the key from the ignition, then turn the ignition back on and press the brake pedal down 2 or 3 times.

By doing this, if the fault is resolved, the light will turn off.


Posted on 1 April 2026 by ScegliAuto


Related tutorials

Fiat Idea (2003-2016 / MK 1) Before you begin, sit in the driver's seat of your Fiat Idea. Start by activating the instrument panel. Then, press the "mode" button located to the …
Fiat Idea (2003-2016 / MK 1) In this mini guide dedicated to your Fiat Idea Mk2, we will discover where the fuse box is located. Before starting, remember that any replacement or…
Fiat Idea (2003-2016 / MK 1) In this new guide aimed at all of you who own a Fiat Idea, we will help you safely locate the box containing all the fuses of the car. First of all, …
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

How to Remove the Spare Wheel from the Citroen C4 Picasso

Follow these instructions to remove the spare wheel and replace it on the Citroen C4 Picasso. On this model, the spare wheel is located under the vehicle's floor; to lower it, simply unscrew the bolt to loosen the strap, then disconnect it from the spare wheel, as shown in the video. At this point, lift the vehicle and remove the wheel, securing the spare wheel or space-saver; tighten the bolts in a criss-cross pattern, finally placing the old wheel back under the vehicle's floor!

Watch the video!


by ScegliAuto

More videos