Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Cabin Filter on Fiat 500X

Model: Fiat 500 500 X - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Cabin air filter

See other generations:
Video tutorial

Let's see how to change the cabin filter on a Fiat 500X. We are looking at a vehicle produced for the United Kingdom, so with right-hand drive. For vehicles driving in the EU, which have left-hand drive, we need to think in a mirrored way. The filter is still located on the passenger side, which will be the right side.

Open the passenger door, empty the glove compartment: at the innermost part of the compartment, towards the door, you should see a rectangular plastic panel held by two or three clips. Remove them and take off the panel, as behind it you will find the cabin filter housing.

Open the flap, remove the old filter, clean the housing of dust and debris, and insert the new one respecting the direction of the arrow (which should point towards the inside of the car). Refit everything in reverse order.


Posted on 7 April 2026 by ScegliAuto


Related tutorials

How to Replace the Pollen Filter on a Fiat 500x
Fiat 500 (2014-2022 / 500 X) How to replace the cabin pollen filter on a Fiat 500x? Use a plastic lever to detach the cover located on the right side of the dashboard (right side…
How to Change the Pollen Filter on the Fiat 500L
How to Change the Pollen Filter on the Fiat 500L
Fiat 500 (2014-2022 / 500 X) Replacing the cabin air filter is very important to ensure proper hygiene in the cabin and to avoid the typical bad smell that occurs when the air co…
How to replace the cabin air filter of the Fiat 500X
Fiat 500 (2014-2022 / 500 X) In the following guide you will find the description of all the various steps that you need to follow to complete the replacement of the cabin air fi…

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos