Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Light from a Fiat Punto?

Model: Fiat Punto MK 2, 188 - Years 1999-2011
Part: Tail light

This article explains how to remove the rear light from a Fiat Punto 188 for replacement. You will need a 17mm socket wrench for this operation. First, lift the designated area of the side trim in the boot as shown in the tutorial video, then use the socket wrench to remove the bolt securing the light; once the lower bolt is removed, remove the upper bolt using the socket wrench again. After removing the two securing bolts, pull the light outwards, being careful with the connector; once the light is removed, disconnect the connector by pressing the side clips. Once the connector is removed, the procedure is complete, and you can proceed with the replacement of the light.

Posted on 9 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Rear Light on a Fiat Grande Punto?
How to Remove the Rear Light on a Fiat Grande Punto?
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) Removing the rear light on a Fiat Grande Punto is an extremely simple operation, as shown in this tutorial. All you need to do is open the boot lid a…
Removing the Rear Light from a Fiat Punto
Fiat Punto (1993-1999 / MK 1, 176) Do you want to replace the rear light on a Fiat Punto? Let's see how to proceed with the removal. First, open the boot and remove the inspection cove…
Replacement of the rear light and bulbs of the Fiat Punto.
Replacement of the rear light and bulbs of the Fiat Punto.
Fiat Punto (1999-2011 / MK 2, 188) Today we will discover the instructions that will allow us to disassemble and replace the rear light and its bulbs of the Fiat Punto. First, let's op…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos