Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Punto
    4. : How to disassemble the rear light in the Fiat Punto?

Fiat Punto - Video tutorial

Model: Fiat Punto 199, Punto EVO, Grandepunto , MK 3 - Years 2005-2018
Part: Tail light
Operation: How to disassemble the rear light in the Fiat Punto?

In this tutorial we can see how to replace the rear light on a Fiat Punto, a very simple and quick operation to be carried out if we need to replace a bulb or the light itself. To do this, start by opening the tailgate, then, with a star-shaped screwdriver, unscrew the two screws located along the inner edge of the headlight to be removed. Next, we grab the headlight, pull it towards us and release it from the bodywork. Once the connector has been disconnected, we can remove the back plate in which the bulbs are located and replace the damaged element as needed.


Posted on 13 December 2022 by ScegliAuto

    Frequently Asked Questions

    • Punto 2005-2018 - How to remove the rear light of the Fiat Punto Mk3? Read Answer
    • Punto 2005-2018 - What is the problem with the rear lights on the Fiat Grande Punto? Read Answer
    • Punto 2005-2018 - What is the problem with the rear lights of the Fiat Punto? Read Answer
    • Punto 2005-2018 - How to remove the rear lights on Fiat Grande Punto? Read Answer
    • Punto 2005-2018 - How to replace the rear light bulb on Fiat Punto? Read Answer
    • Punto 2005-2018 - How much does the Fiat Grande Punto led rear light cost? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos