Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Rear Light on a Fiat Punto

Model: Fiat Punto MK 2, 188 - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Tail light

See other generations:
Video tutorial

How to remove the rear light on a Fiat Punto? Let's see how to do it. Open the boot lid and remove the fabric cover located at the bottom side. Undo the screw located under the fabric lining and the screw at the top (rear of the light).

Detach the rear light from its housing once the screws are removed (disconnect the electrical connectors). Replace any damaged bulbs with new ones (same size and voltage).

Secure the new light onto the car body, and tighten the screws behind it. Test the correct operation of the bulbs installed in the new light (turn on the instrument panel of the Punto).


Updated on 20 March 2026 by ScegliAuto


Related tutorials

Removing the Brake Light for Fiat Punto
Removing the Brake Light for Fiat Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) In this video tutorial, you will learn how to remove the upper brake light of the Fiat Punto. Open the boot and remove the rubber caps by disengaging…
How to Replace the Third Brake Light Bulb on a Fiat Grande Punto?
How to Replace the Third Brake Light Bulb on a Fiat Grande Punto?
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) To replace the third brake light bulb on a Fiat Grande Punto, lift the tailgate of the boot so you can detach the third brake light housing from the …
How to Replace the Third Brake Light Bulb on a Fiat Punto
How to Replace the Third Brake Light Bulb on a Fiat Punto
Fiat Punto (1999-2011 / MK 2, 188) To replace the third brake light bulb on a Fiat Punto, open the tailgate to access the panel located on the upper inside of the tailgate. Once this p…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos