Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Brake Light for Fiat Punto

Model: Fiat Punto 199, MK 3, Grandepunto , Punto EVO - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Tail light

See other generations:
Video tutorial

In this video tutorial, you will learn how to remove the upper brake light of the Fiat Punto. Open the boot and remove the rubber caps by disengaging them: press in on the two metal clips and push upwards to release the light and extract it. You may need to use a plastic lever to gently push from the side of the clips if it does not come out easily.

Once removed, disconnect the stop light connector: to access the bulbs, pull the two clips to separate the bulb holder from the light unit and replace the bulbs!


Updated on 18 March 2026 by ScegliAuto


Related tutorials

Removing the Rear Light on a Fiat Punto
Removing the Rear Light on a Fiat Punto
Fiat Punto (1999-2011 / MK 2, 188) How to remove the rear light on a Fiat Punto? Let's see how to do it. Open the boot lid and remove the fabric cover located at the bottom side. Undo …
Removing the Rear Headlight on a Fiat Punto
Removing the Rear Headlight on a Fiat Punto
Fiat Punto (1999-2011 / MK 2, 188) Want to replace the rear headlight on your Fiat Punto? Here's how to proceed with the removal. Open the boot and remove the inspection cap located at…
Replacing the Rear Headlight on a Fiat Grande Punto
Replacing the Rear Headlight on a Fiat Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) Do you want to replace the damaged rear headlight on a Fiat Grande Punto? Let's see how to disassemble the headlight. Lift the rear hatch of the car,…

How to Reset the Tyre Light on a Toyota Aygo?

To reset the tyre light on a Toyota Aygo, start by locating the reset button, which is found in the glove compartment of the front passenger side. Turn on the car and ensure that the tyres are at the correct pressure. Then, press and hold the reset button for a few seconds until the tyre light either flashes or turns off, depending on the model. Release the button and wait for the reset procedure to complete. Restart your Toyota Aygo and check if the tyre light has turned off, indicating that the reset was successful.

Watch the video!


by ScegliAuto

More videos