Do it yourself
Frequently asked questions about cars and motorcycles

Replacing the Rear Headlight on a Fiat Grande Punto

Model: Fiat Punto MK 3, Punto EVO, 199, Grandepunto - Years 2005-2018
Part: Tail light

Do you want to replace the damaged rear headlight on a Fiat Grande Punto? Let's see how to disassemble the headlight. Lift the rear hatch of the car, locate the headlight to be removed. Unscrew the securing screws on the side of the headlight (right) with a screwdriver. Disconnect the rear headlight from its housing once all screws are removed (disconnect the power connectors) and replace the damaged bulbs with new ones (same size and voltage). Connect the power connectors, secure the new headlight onto the car body, and screw in the securing screws. Test the correct operation of all the bulbs in the rear headlight.

Updated on 31 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) How to remove the rear light on a Fiat Grande Punto? In this guide, learn how to replace damaged bulbs: open the boot lid, unscrew (with a socket spa…
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) Do you want to replace the rear light bulbs on Fiat Grande Punto? Here's how to proceed with the disassembly: first, open the boot lid and unscrew th…
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) How to remove the rear light (right) on a Fiat Grande Punto? In this video, we will see how to replace damaged bulbs. Open the boot lid, and with a s…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos