Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Rear Headlight on a Fiat Punto

Model: Fiat Punto MK 2, 188 - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Tail light

See other generations:
Video tutorial

Want to replace the rear headlight on your Fiat Punto? Here's how to proceed with the removal. Open the boot and remove the inspection cap located at the top of the seatbelt and at the bottom of the boot lining using a lever.

Unscrew the securing bolts of the headlight with a socket spanner, and use a plastic lever to help remove the rear headlight. Replace the damaged bulbs with new ones (same size and voltage).

After replacing the worn bulbs, prepare to reassemble the headlight with its parts. Finally, test the correct functioning of the bulbs.


Updated on 15 March 2026 by ScegliAuto


Related tutorials

Removing a Rear Light from Your Fiat Grande Punto
Removing a Rear Light from Your Fiat Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) Removing a rear light from your Fiat Grande Punto? Watch this video to learn how to replace damaged bulbs. Open the boot lid, and using a screwdriver…
How to Replace the Front Headlamp Bulb on a Fiat Punto
How to Replace the Front Headlamp Bulb on a Fiat Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) To replace the front headlamp bulb on a Fiat Punto, access the rear of the headlamp by opening the bonnet and entering the engine compartment. Here, …
How to Replace the Front Headlight Bulb on a Fiat Punto?
How to Replace the Front Headlight Bulb on a Fiat Punto?
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) To replace the front headlight bulb on a Fiat Punto, open the bonnet to access the engine bay. You will need to remove the protective cover from the …

How to Reset the Tyre Light on a Toyota Aygo?

To reset the tyre light on a Toyota Aygo, start by locating the reset button, which is found in the glove compartment of the front passenger side. Turn on the car and ensure that the tyres are at the correct pressure. Then, press and hold the reset button for a few seconds until the tyre light either flashes or turns off, depending on the model. Release the button and wait for the reset procedure to complete. Restart your Toyota Aygo and check if the tyre light has turned off, indicating that the reset was successful.

Watch the video!


by ScegliAuto

More videos