Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Punto
    4. : How to remove the rear light of the Fiat Grande Punto?

Fiat Punto - Video tutorial

Model: Fiat Punto 199, Punto EVO, Grandepunto , MK 3 - Years 2005-2018
Part: Tail light
Operation: How to remove the rear light of the Fiat Grande Punto?

Removing the rear light of the Fiat Grande Punto is an extremely simple operation, as we can see in this tutorial. All that needs to be done is to open the tailgate of the luggage compartment and unscrew the two screws located on the inner edge of the headlight. After that, it will be enough to grab it and pull it outwards, as shown in the video. Once this is done, we can disconnect the rear connector and proceed with the replacement of the damaged element, whether it is a light bulb or the headlight itself. Reposition the headlight to the bodywork will be just as simple, just follow the reverse procedure.


Posted on 6 April 2024 by ScegliAuto

    Frequently Asked Questions

    • Punto 2005-2018 - How to remove the rear light of the Fiat Punto Mk3? Read Answer
    • Punto 2005-2018 - What is the problem with the rear lights on the Fiat Grande Punto? Read Answer
    • Punto 2005-2018 - What is the problem with the rear lights of the Fiat Punto? Read Answer
    • Punto 2005-2018 - How to remove the rear lights on Fiat Grande Punto? Read Answer
    • Punto 2005-2018 - How to replace the rear light bulb on Fiat Punto? Read Answer
    • Punto 2005-2018 - How much does the Fiat Grande Punto led rear light cost? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos