Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the tyre pressure warning light on a Fiat Panda?

Model: Fiat Panda 319, MK 3 - Years 2012-2026
Part: Service warning light

To reset the tyre pressure warning light on a Fiat Panda, get in the car and turn on the ignition without starting the engine. Use the buttons on the dashboard to enter the menu displayed on the central screen. Scroll to the Settings option. Then select "service" and finally "Reset tyre pressure" or "TPMS". Confirm the selection by holding down the OK button until the display shows the reset message. The system stores the current pressures as reference values. Turn off the ignition and restart the vehicle to check that the tyre pressure warning light is no longer illuminated.

Posted on 18 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Resetting the Tyre Pressure Light on Fiat Panda
Resetting the Tyre Pressure Light on Fiat Panda
Fiat Panda (2012-2026 / 319, MK 3) This very simple procedure can be performed on Fiat Panda and similar vehicles to reset the tyre pressure warning light. Use the selection buttons lo…
Resetting the Tyre Pressure Light on a Fiat Panda
Resetting the Tyre Pressure Light on a Fiat Panda
Fiat Panda (2012-2026 / 319, MK 3) What to do if a light appears? Let’s see how to reset the tyre pressure light on a Fiat Panda. To reset the tyre pressure light: turn on the ignition…
How to Reset the "Tyre Pressure" Light on a Fiat Panda
How to Reset the "Tyre Pressure" Light on a Fiat Panda
Fiat Panda (2012-2026 / 319, MK 3) Before starting, sit in the driver's seat of your Fiat Panda. Begin by turning on the ignition, simply by turning the key in the ignition switch, and…

Other guides you may be interested in

    Frequently Asked Questions

    • Panda 2003-2012 - What to do when the service warning light comes on on the Fiat Panda 169? Read answer
    • Panda 2012-2026 - How do you reset the Fiat Panda Service warning light? Read answer

How to Reset the Central Locking of the Volkswagen Golf 4?

If the central locking system of the Volkswagen Golf 4 is not working, it is likely necessary to reset the system: to do this, open the driver's door and detach the side panel of the dashboard next to the steering wheel. Under this panel, you will find the fuses, including the one for the central locking, which is indicated in the manual as number 14. To reset the system, remove this fuse from its housing, then reinsert it or replace it with a new one of the same amperage: this will reset the central locking system.

Watch the video!


by ScegliAuto

More videos