Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Gear Lever Gaiter in a Fiat Bravo

Model: Fiat Bravo Bravo 2 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Shifter boot

See other generations:
Video tutorial

To remove the gear lever gaiter on a Fiat Bravo, first detach the base of the lever from the centre console to free up workspace. Remove the gear knob by pulling it upwards or unscrewing it, depending on the model.

Lift the trim or scuff plate around the lever, unclipping any securing clips. With the base free, gently pull the old gaiter upwards, taking care not to deform the rubber part or the grooves.

After completely removing the gaiter, proceed to fit the new one, attaching it first to the base of the lever and then to the centre console, then reattach the gear knob and trim, ensuring the lever moves smoothly through all gears.


Posted on 9 November 2026 by ScegliAuto


Related tutorials

Remove Gear Knob on Fiat Bravo
Remove Gear Knob on Fiat Bravo
Fiat Bravo (2007-2014 / Bravo 2) Is the gear knob in your car broken? Let's look at removing the gear knob on a Fiat Bravo. Replace the knob if damaged or if you want to change the m…
Replace the Gear Knob on Your Fiat Bravo
Replace the Gear Knob on Your Fiat Bravo
Fiat Bravo (2007-2014 / Bravo 2) Want to replace the gear knob on your Fiat Bravo? In this video, see how to do it. Use a plastic lever to disconnect the logo on top of the knob; gra…
How to Replace the Gear Lever Bush of the Fiat Bravo 1
Fiat Bravo (1995-2001 / ) This guide outlines the main steps to dismantle and replace the gear lever bush, which causes excessive play, in the Fiat Bravo, as well as in the Pa…

How to Open the Bonnet of a Toyota C-HR

To open the bonnet of a Toyota C-HR, get inside the vehicle and lift the lever with the bonnet symbol located under the steering wheel. After lifting the lever, you will notice that the bonnet rises a few centimetres. Position yourself in front of the bonnet, insert your hand into the gap, and move the small internal lever from right to left, then lift the bonnet. You can keep the bonnet open during maintenance by positioning it on the support rod. To close the bonnet, remove the support rod and let it drop back down.

Watch the video!


by ScegliAuto

More videos