Do it yourself
Frequently asked questions about cars and motorcycles

How to change the spark plugs on a Fiat 500

Model: Fiat 500 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Spark plugs

See other generations:
Video tutorial

Switch off the ignition, pull the handbrake, and open the bonnet. To access the spark plugs, you need to remove the air filter box: first, unscrew the screws of the intake duct with a 4 mm Allen key, then loosen the hose clamp.

Using a 10 mm socket and extension, remove the two screws securing the filter box. Disconnect the small vacuum hose from the back, lift the box, and remove the second hose by loosening the clamp with a flat screwdriver. Now you can see the four coils (spark plug covers): pull them out. Unscrew the spark plugs with a 16 mm socket and extension.

Insert the new spark plugs into the special tool to avoid damage, screw them in by hand, and tighten with half a turn (or use the torque specified by the manufacturer). Refit the coils, reconnect the hoses, and reinsert the filter box, ensuring it clicks into place, then screw in the screws and the intake duct.


Posted on 22 November 2026 by ScegliAuto


Related tutorials

Fiat 500 (1957-1975 / Epoca) Before starting, open the rear engine cover of your Fiat 500. Begin by disconnecting and moving the two connectors attached to the spark plugs. Next,…
Fiat 500 (2007-2021 / ) To replace the spark plugs of the Fiat 500, lift the bonnet to access the engine bay and disconnect all the hoses connected to the engine so that the…
Fiat 500 (2007-2024 / 312) Learn how to remove and replace the spark plugs on a Fiat 500. Open the engine bay, lift the bonnet, secure it, and disconnect the battery terminals.…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Other guides you may be interested in

    Frequently Asked Questions

    • 500 2007-2022 - How much does it cost to replace the Fiat 500 spark plugs? Read answer

How to Reset the Tyre Pressure Warning Light on a Fiat Doblò?

To reset the tyre pressure warning light on a Fiat Doblò, you need to inflate the tyres until they reach the recommended pressure value. This value is indicated on the sticker attached to the driver's door pillar. After inflating the tyres, turn on the ignition by inserting the key. You can then press the button with the car icon on the left side of the central display. Select the option for resetting the tyre pressure and confirm with "Yes" on the message that appears next.

Watch the video!


by ScegliAuto

More videos