Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Rear Bumper on Fiat Grande Punto

Model: Fiat Punto 199, MK 3, Grandepunto , Punto EVO - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Rear bumper

See other generations:
This video is currently unavailable

In this video, learn how to remove the rear bumper from the Fiat Grande Punto. First, lift the car as you will need to remove the rear wheel: then, remove the wheel arch liner by taking out the screws located inside the holes and the 10 mm plastic nut. Now, using a T30 Torx, remove the screw from the bumper.

Repeat the process on the other side. Next, unscrew the screw located at the centre underneath the bumper and the other side and top screws: disconnect the number plate lights and proceed to remove the bumper by pulling it towards you!


Updated on 18 March 2026 by ScegliAuto


Related tutorials

How to Remove the Rear Bumper of a Fiat Grande Punto
How to Remove the Rear Bumper of a Fiat Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) Remove the rear bumper of a Fiat Grande Punto. Follow these steps carefully. First, use a screwdriver (or battery-powered drill) to remove the screws…
Removing the Front Light of a Fiat Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) In this video tutorial, you will learn how to remove the front light of a Fiat Grande Punto. First, open the bonnet. Then, unscrew the wheel arch scr…
How to Fit the Front Bumper on Fiat Grande Punto
How to Fit the Front Bumper on Fiat Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) How to fit the front bumper on a Fiat Grande Punto? Follow these steps; it’s not too complex if done in order. First, take the bumper and align it pe…

How to Open the Fuel Filler Flap in the Hyundai i30?

In this tutorial, you will learn how to open the fuel filler flap in the Hyundai i30, a very simple operation that follows the typical procedure of most vehicles. First, unlock the locks using the designated button on the remote, then open the driver's door, locate the release lever on the left side of the seat, and operate it. Next, move to the fuel filler flap, open it completely, unscrew the cap, and refuel as needed. To close the flap, simply press it gently.

Watch the video!


by ScegliAuto

More videos