Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Punto
    4. : How to remove the rear bumper of a Fiat Grande Punto

Fiat Punto - Video tutorial

Model: Fiat Punto Punto EVO, Grandepunto , MK 3, 199 - Years 2005-2018
Part: Rear bumper
Operation: How to remove the rear bumper of a Fiat Grande Punto

How to remove the rear bumper of a Fiat Grande Punto. Let's see together how to proceed. Operation not too complex if you proceed in order. First of all with a screwdriver (battery screwdriver) we unscrew the screws located in the upper part of the bumper, then, we remove the screws placed on the sides of the car's stone guards (both two stone guards) and in the lower part. Once the bumper is free from any screw or pin: let's take it with your hands and pull it away from the bodywork (disconnect any power cables). We mount the new bumper in the dedicated housing.


Posted on 17 November 2023 by ScegliAuto



Disassembly of the rear bumper Fiat Grande Punto
Fiat Punto (2005-2018 / Punto EVO, Grandepunto , MK 3, 199) In this video we will see how to remove the rear bumper of the Fiat Grande Punto. First we will have to lift the car as we will have to remove the re
How to mount the front bumper on Fiat Grande Punto
Fiat Punto (2005-2018 / Punto EVO, Grandepunto , MK 3, 199) How to mount the front bumper on Fiat Grande Punto? Let's see how to proceed, an operation not too complex if you proceed in order. First of all we t
How to remove the front bumper on Fiat Punto Evo - Grande Punto
Fiat Punto (2005-2018 / Punto EVO, Grandepunto , MK 3, 199) In today's video we will see how to remove the front bumper on a Fiat Punto Evo and Grande Punto, following these simple steps. First we open and lif

    Frequently Asked Questions

    • Punto 2005-2018 - How much does it cost to replace the rear bumper on my Fiat Punto? Read Answer

How do you replace the horn on the Citroà «n Berlingo?

In order to replace the horn on the Citroà «n Berlingo, the vehicle must be raised so that the screws that secure the left front wheel can be loosened and removed completely. Once this wheel has been removed, it will be possible to access the screws that secure the internal cover of the corresponding wheel arch: this will have to be detached and it will be possible to access the components inside, including the horn. This will need to be disconnected from its connector and removed from its holders, so that it can be replaced with a new spare part.

Watch the video!


by ScegliAuto

More videos