Do it yourself
Frequently asked questions about cars and motorcycles

Removing Fuses on Fiat 500

Model: Fiat 500 312 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Fuse box

See other generations:
Video tutorial

Need to remove the damaged fuses in the dedicated compartment of a Fiat 500? Here’s how to change the damaged fuses. Open the door and enter the vehicle, pull the lever to open the front bonnet.

Lift the bonnet, and use a plastic lever to remove the trim above the fuse container. Once the designated compartment is open, use pliers to pull out the damaged fuses located inside.

Fit the new fuses into the designated slots in the compartment. Close the plastic cover of the fuse box. Test the correct operation of the Fiat 500 after fitting all the fuses.

Turn on the instrument panel with the dedicated key. Close the front bonnet after testing.


Updated on 19 March 2026 by ScegliAuto


Related tutorials

Fiat 500 (2007-2024 / 312) When the radio of the Fiat 500 suddenly stops working, one of the possible causes is the failure of the fuse related to it. The radio fuse on a Fiat …
Fiat 500 (2007-2024 / 312) The cigarette lighter fuse in the Fiat 500 is located in one of the fuse boxes installed in the vehicle: this fuse is in the box located inside the e…
Fiat 500 (2007-2022 / ) This model of vehicle has two fuse boxes: the first is located in the cabin on the lower left side of the dashboard, while the second is in the engin…

    Frequently Asked Questions

    • 500 2012-2023 - Where is the fuse of the license plate light in the Fiat 500? Read answer

How to Open the Bonnet of a Toyota C-HR

To open the bonnet of a Toyota C-HR, get inside the vehicle and lift the lever with the bonnet symbol located under the steering wheel. After lifting the lever, you will notice that the bonnet rises a few centimetres. Position yourself in front of the bonnet, insert your hand into the gap, and move the small internal lever from right to left, then lift the bonnet. You can keep the bonnet open during maintenance by positioning it on the support rod. To close the bonnet, remove the support rod and let it drop back down.

Watch the video!


by ScegliAuto

More videos