Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Alternator Pulley and Alternator from a Fiat Idea 1300 Mjt

Model: Fiat Idea MK 1 - Years 2003-2016
Part: Alternator

In this video, you will learn how to remove the alternator pulley and alternator from a Fiat Idea. First, remove the front right wheel and lift the car: then remove the wheel arch liner by undoing the screws. At this point, loosen the tensioner with a 15mm spanner to allow removal: if you want to remove the alternator, you will find it secured with bolts, so undo them for removal (remove the pins); pull outwards to extract it, which will also require removing the pulley to make space, as shown in the video. Follow the video for further tips!

Updated on 21 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove and Replace the Diesel Filter on Fiat Idea 1300 MultiJet
How to Remove and Replace the Diesel Filter on Fiat Idea 1300 MultiJet
Fiat Idea (2003-2016 / MK 1) Follow these steps to remove and replace the diesel filter on Fiat Idea 1300 MultiJet. First, lift the bonnet and secure it. Once you locate the fuel…
How to Change the Timing Belt on a Fiat Idea 1.4
How to Change the Timing Belt on a Fiat Idea 1.4
Fiat Idea (2003-2016 / MK 1) In this video tutorial, you will find the main instructions for removing and replacing the timing belt on a Fiat Idea 1.4, as well as on a Lancia Mus…
Guide to Replacing the Timing Belt on a Fiat Idea 1.4 8V
Guide to Replacing the Timing Belt on a Fiat Idea 1.4 8V
Fiat Idea (2003-2016 / MK 1) Today, we will discover the steps to remove and replace the timing belt on a Fiat Idea 1.4 8V. First, lift the vehicle and start by removing the fron…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos