Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Dashboard of a Fiat Punto

Model: Fiat Punto MK 1, 176 - Years: 1993, 1994, 1995, 1996, 1997, 1998, 1999
Part: Dashboard

See other generations:
Video tutorial

Today, this video tutorial will show you how to remove the dashboard of a first-generation Fiat Punto. First, get inside the vehicle and remove the screws found at the top and bottom using a spanner, as well as those around the air vents to detach them.

Next, remove the air adjustment control and unscrew the screw located underneath to take off the plastic trim of the air adjustment knobs: remove the other screws and take out the entire air vent piece, disconnecting the electrical connector located at the back.


Updated on 22 March 2026 by ScegliAuto


Related tutorials

Replacing the Heater Fan Resistor on Fiat Grande Punto
Replacing the Heater Fan Resistor on Fiat Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) Want to remove the heater fan resistor on a Fiat Grande Punto? Let's see how to disassemble the fan resistor. Remove the plastic cover from under the…
Removing the instrument cluster on a Fiat Punto, follow the disassembly of the part. Remove the plastic trim of the instrument cluster (unscrew the screws) and detach it from the dashboard, then remove the trim above the steering wheel and unscrew the sec
Removing the instrument cluster on a Fiat Punto, follow the disassembly of the part. Remove the plastic trim of the instrument cluster (unscrew the screws) and detach it from the dashboard, then remove the trim above the steering wheel and unscrew the sec
Fiat Punto (1999-2011 / MK 2, 188) …
Removing the Glove Compartment of the Grande Punto
Removing the Glove Compartment of the Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) How to remove the glove compartment of a Fiat Grande Punto? Enter the car's interior and see how to dismantle the parts. Open the glove compartment a…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos