Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Fitting an Additional Chip Tuning Module

Model: Fiat Doblo Doblo 1, MK 1, 223 - Years: 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Control unit

See other generations:
Video tutorial

Open the bonnet and locate the pressure sensor on the rail: it is on the left side (when facing the engine) near the oil level dipstick. At this point, using a small screwdriver, unclip the connector's safety catch and then the connector itself: install the additional module by creating a bypass, connecting the original connector to the module's wiring and the outgoing connector from the module to the pressure sensor; then find a location to mount the module without interfering with moving parts and excessive heat.


Updated on 6 February 2026 by ScegliAuto


Related tutorials

Where to Find and How to Access the Radio Fuse of a Fiat Doblo
Where to Find and How to Access the Radio Fuse of a Fiat Doblo
Fiat Doblo (2000-2009 / Doblo 1, MK 1, 223) The radio fuse for your Fiat Doblo is located inside the fuse box. The fuse box is situated on the lower left side of the steering column. To access …
Where to Find and How to Access the Radiator Fan Fuse on a Fiat Doblo
Where to Find and How to Access the Radiator Fan Fuse on a Fiat Doblo
Fiat Doblo (2009-2021 / MK 2, Doblo 2, 263) The radiator fan fuse on your Fiat Doblo is located inside the fuse box. The fuse box itself is situated in the engine compartment, near the battery.…
Fiat Doblò MK1 Fuse Diagram
Fiat Doblo (2000-2009 / Doblo 1, MK 1, 223) In today's guide, you will see the diagram of the internal fuse box and the one located in the engine compartment of a first series Fiat Doblò. First…

How to Reset the AdBlue Warning Light on a Peugeot Boxer

To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset.

Watch the video!


by ScegliAuto

More videos